Right Arm Chaise Lounge – Create your own covers to give a fresh and updated look to your site without spending a fortune on new furniture. But you must pay attention to this, when choosing a fabric, bring a sample of your current fabric. To ensure your new coordinates of choice with the rest of the chair or other furniture. Inflatable castles often get dirty, so try sticking with the cloth that is stain-resistant and washable.
Lay your fabric on the right arm chaise lounge and measure the sides. Mark lightly on the wrong side of the fabric, then place your straight pins along the measurement lines. Lay a piece of cloth over the front of the arm, the wrong side out. Using your marker lightly, trace the outline of the front of the arm of the chair, then place straight pins along the curve you drew. Be sure to locate each curve accurately, or the case will not fit once sewn. Using your scissors, cut the side and front bolts approximately 1 inch away. The result should be three hemmed edges and a short left end. Repeat the procedure on the other side piece.
12 Picture Gallery: DIY Right Arm Chaise Lounge Cover
Sew the front and side pieces together along the bolts, slightly picking the weft from the front piece you sew. This will help the finished slipcover fit tightly to the armchair once finished. Remove the straight pins and repeat for the other arm. Turn right out and place in your chair. The result will be a perfectly equipped right arm chaise lounge cover.
This post topic: Chaise